Description :

• Manual bench complete with 3 pressure feet with adaptors. ACCESSORIES INCLUDED.
  
  The two head supports are implemented with non-scratch plastic material and are adjustable from 0 to 30°. There are two handles for locking when the right inclination is set.
  It is also possible to regulate the horizontal position of the head moving the pins to the apposite holes up and down. There is a long regulation also for the push rod in case of deep valve chambers. The frame can be rotated 30° on both sides.
  
  Moreover can be regulated also forward and backwards. In case of valves locked hard into the seat, hit on the slide hammer on the top with a plastic mallet. The bench is also provided with a travel limit device that guarantees the same stroke for each valve.
  
  Meanwhile the valve spring is compressed, the operator can block the position using the apposite pin. Consequently he can work on the valves having both hands free.
  
  Dimensions: 785 x 500 x 625 mm
  Stroke: 265 mm
  Cylinder head: 750 mm
  Length: 185 mm min.
  Inclination angle = 0° - 30°
  Total weight: 25,5 Kg

(315019000)